Bit Guardian Parental Control enables you to set up Geofence on your kid’s device. An alert with the current location is sent to the parent’s device every time a child enters or exits the defined zone.
First of all, you need to make sure that the location service is enabled on your kid’s device. You may do so from the phone Settings.
To set Geofence, Follow the steps below:
Step 1: Go to the Parent dashboard.
Step 2: Tap on the kid and go to the features.
Step 3: Tap GPS.
Step 4: To Enable setting, turn on the toggle button. (Allow Location Permission)
Step 5: Under Geofence, tap on Center Location to choose the starting point on the map. You can also choose a nearby place from visible suggestions.
Step 6: Select the location you want to use.
Step 7: Tap on Radius and set the distance in meters. Tap Apply. It will create a safe zone around the area, and when your kid leaves that zone, an alert will be sent to the parent’s device.
Note: The Recommended radius is 100 meters minimum for better accuracy results. You can see the kid’s location from the dashboard.
Set the speed limit
You can also set the speed limit at which your kids are allowed to travel. Same as Geofence, on exceeding the speed limit, you will be immediately notified.
Here’s how you do it.
Step 1: Go to the Parent dashboard.
Step 2: Tap on the kid and go to the features.
Step 3: Tap GPS.
Step 4: To enable the feature, turn on the toggle button. (Allow Location Permission)
Step 5: Under Geofence, tap Speed Limit to set the maximum speed limit. Tap Apply.
When your child exceeds that limit, an alert will be sent to the parent’s device immediately.
1 Comment